波浪浮标集成_海洋工业_产品_进口工业设备采购商

波浪浮标集成

服务费用：物流费物流费物流费调试安装费
发货时间：24小时（有货状态）

点击定制确认订单支付费用 24小时发货

波浪传感器，需将其进行集成以使用，长宽高分别为16*16*9cm，重1.5kg。要求集成后着整个浮标的重心位于几何中心线上，同时传感器也位于几何中心线上。

1.波浪浮标体主要组成部分

主要由观测浮标标体、专用电池和太阳能板和锚系三大部分组成。

1.1 观测浮标标体

（1）浮标体材质：由316L不锈钢材质组成，能确保浮标在遭受严重碰撞后不会导致标体内部仪器舱进水，同时标体外围应有防撞保护。

（2）浮标体形状：应采用椭球形设计，浮标型宽80cm左右，型高60cm左右。浮标体应带有大U型环，其拉力不低于1t，用于连接无扭矩水平钢缆。

1.2 专用电池和太阳能板

主要用于波浪传感器、航标灯、GPS、AIS、北斗3和4G通信等设备的供电。

（1）规格：专用电池12V 400AH可充电式锂电池，安装于浮标体内，有可充电接口；太阳能板总体72W，且均匀分布在浮标体上。要求有能源控制系统，在大浪时固定不松动，同时保证标体的重心为主中心线上；

（2）保证浮标在阴雨天气时可工作1个月以上。

1.3 锚系

锚系应采用复合型锚系，适用于水深60-80m。

（1）组成：需包含带有导流尾翼的锚固浮球、无扭矩平衡缆绳、霍尔锚、锚托底锚链、悬垂锚链、小浮球、转环卸扣等。

（2）锚固浮标：锚固浮球要求带有导流尾翼设计，其浮力不低于350kg。

2.波浪浮标通信

支持4G通信和北斗3（含接收站）等通信方式。

3.安防

具有AIS网位仪、GPS定位、航标灯等安防措施。

4 存储与数据采集软件

能存储仪器的实时数据，数据存储器容量不低于16GB。有配套的岸站数据接收系统，该系统能查看浮标的实时状态（电流电压、位置）和接收实时数据，同时具有进水、开盖和移位报警功能。

The wave sensor needs to be integrated for use, with dimensions of 16 * 16 * 9cm in length, 16 * 9cm in width, and 1.5kg in height. After integration, it is required that the center of gravity of the entire buoy is located on the geometric centerline, and the sensor is also located on the geometric centerline.

1. Main components of wave buoy body

It mainly consists of three parts: observation buoy body, dedicated battery, solar panel, and anchor system.

1.1 Observation buoy markers

(1) Material of buoy body: Made of 316L stainless steel material, it can ensure that the buoy will not cause water to enter the instrument compartment inside the target body after severe collision, and the periphery of the target body should have anti-collision protection.

(2) Float body shape: It should adopt an ellipsoidal design, with a float width of about 80cm and a height of about 60cm. The buoy body should be equipped with a large U-shaped ring with a tensile force of not less than 1t, used to connect non torque horizontal steel cables.

1.2 Specialized batteries and solar panels Mainly used for power supply of wave sensors, navigation lights, GPS, AIS, Beidou-3 and 4G communication equipment.

(1) Specification: Special battery 12V 400AH rechargeable lithium battery, installed in the float body, with a rechargeable interface; The solar panels are 72W in total and evenly distributed on the buoy body. Require an energy control system that is securely fixed during large waves, while ensuring that the center of gravity of the target body is on the main centerline;

(2) Ensure that the buoy can work for more than one month in rainy weather.

1.3 Anchor system

The anchor system should adopt a composite anchor system, suitable for water depths of 60-80m.

(1) Composition: It should include an anchored floating ball with a guiding tail, a torque free balance cable, a Hall anchor, an anchor support bottom anchor chain, a suspended anchor chain, a small floating ball, a swivel shackle, etc.

(2) Anchor buoy: The anchor buoy is required to have a guiding tail design, with a buoyancy of not less than 350kg.

2. Wave buoy communication Supports communication methods such as 4G communication and Beidou 3 (including receiving stations).

3. Security Equipped with security measures such as AIS positioning device, GPS positioning, and navigation beacon lights.

4 Storage and Data Collection Software

Capable of storing real-time data of instruments, with a data storage capacity of no less than 16GB. There is a supporting shore station data receiving system that can view the real-time status (current, voltage, position) of the buoy and receive real-time data. It also has functions such as water ingress, cover opening, and displacement alarm.